Asus X441N is one of the newest laptops from Asus that now comes with UEFI (Unified Extensible Firmware Interface) support, providing more advanced and secure customization options in BIOS settings. If you are considering installing Windows 10 on your Asus X441N, here is a guide on how to set up your BIOS settings.
Cara Setting BIOS ASUS X441N UEFI Plus Instal Windows 10
Before installing Windows 10 on your Asus X441N, you need to check your BIOS settings. Here is how to do it:
- Restart your Asus X441N laptop and press the F2 key repeatedly to enter the BIOS settings.
- In the BIOS settings, press the right arrow key to move to the Boot tab, then select CSM (Compatibility Support Module) and press Enter.
- In CSM, select Enabled on Launch CSM, and set Boot Device Control to UEFI and Legacy OPROM. Then, Save and Exit the BIOS settings.
- Now, insert your Windows 10 installation USB flash drive into the USB port on your Asus X441N laptop. Then, restart your computer and press the F2 key repeatedly to enter the BIOS settings again.
- In the BIOS settings, go to the Boot tab, select the USB drive, and press Enter. Then, press Enter again to confirm.
- Wait for your Asus X441N to boot from the USB drive. Then, follow the instructions on the screen to install Windows 10 on your Asus X441N laptop.
That’s it – now you have successfully set up your BIOS settings and installed Windows 10 on your Asus X441N laptop!
Cara Instal Ulang Android Melalui Pc
Are you having problems with your Android phone or tablet and need to reinstall the operating system? Here is a guide on how to reinstall Android on your device using your PC.
- Download and install the latest version of the Android USB driver for your device on your PC. You can download the driver from the manufacturer’s website or from third-party websites.
- Download the Android SDK Platform Tools on your PC, then extract the ZIP file to a folder on your desktop.
- Connect your Android device to your PC using a USB cable. Make sure your device is in USB debugging mode.
- Open the Command Prompt on your PC and navigate to the folder where you extracted the Android SDK Platform Tools by typing “cd foldername”.
- Type “adb devices” and press Enter. If your device is recognized, you will see a message saying “List of devices attached” with the serial number of your device.
- Type “adb reboot bootloader” and press Enter to reboot your device into bootloader mode.
- Type “fastboot devices” and press Enter. If your device is recognized, you will see a message saying “List of devices attached” with the serial number of your device.
- Type “fastboot flash system [filename.zip]” and press Enter, replacing [filename.zip] with the name of the firmware file you downloaded earlier. This will flash the firmware file on your device.
- Type “fastboot reboot” and press Enter. Your device will reboot and should now be running the latest version of Android.
That’s it – now you have successfully reinstalled Android on your device using your PC!
Cara Instal Ulang Laptop Asus X453m Menggunakan Flashdisk
Are you tired of slow performance on your Asus X453m laptop? Here is a guide on how to reinstall the operating system using a flash drive.
- Download the Windows 10 Media Creation Tool from Microsoft’s website and save it on a flash drive or USB drive.
- Insert the flash drive with the Windows 10 Media Creation Tool into your Asus X453m laptop and turn it on.
- Press the F2 key repeatedly to enter the BIOS settings.
- In the BIOS settings, go to the Boot tab and select the flash drive as the first boot device. Then, Save and Exit the BIOS settings.
- The Windows 10 Media Creation Tool will now run on your Asus X453m laptop. Follow the instructions on the screen to reinstall Windows 10 on your laptop using the flash drive.
- Once the installation is complete, restart your Asus X453m laptop and remove the flash drive.
That’s it – now you have successfully reinstalled Windows 10 on your Asus X453m laptop using a flash drive!
FAQ
What is UEFI?
UEFI (Unified Extensible Firmware Interface) is a new type of firmware developed to replace BIOS (Basic Input/Output System) in computers. UEFI offers advanced and secure customization options, faster boot times, and support for larger hard drives and newer technologies.
What is USB debugging mode?
USB debugging mode is a developer option that allows your Android device to communicate with your PC via a USB cable so that you can run and debug apps on your device from the PC. To enable USB debugging mode, go to Settings > System > Developer options > USB debugging and toggle the switch to ON.